Using KVM in the RHEL 5.4 Beta – fixing bridges

Posted 2009-07-18

When you use KVM in Rhel 5.4 Beta you will notice that there is no bridge setup to allow your virtual guests to directly connect to the local network.

However, it is easily fixed:

As we are using libvirt, we just need to do two steps, as outlined here:

Step 1: Create the bridge script at /etc/sysconfig/network-scripts/ifcfg-br0

DEVICE=br0<br /> BOOTPROTO=static<br /> TYPE=Bridge<br /> IPADDR=10.20.30.40<br /> NETMASK=255.255.255.0<br /> ONBOOT=yes<br /> NM_CONTROLLED=no

As you can see, I use static IP config.

Step 2: hook up eth0 to the bridge and remove it’s IP config in /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0<br /> BOOTPROTO=none<br /> ONBOOT=yes<br /> BRIDGE=br0<br /> NM_CONTROLLED=no<br /> TYPE=Ethernet

Now restart the network and done. When you now create a new virtual machine with virt-manager, you can select to have it directly hooked up to the physical network.

Loading Google+ Comments ...